bing tracking image

Volkswagen Passat Trailer Wiring Installation And Review Videos

     

Trailer Wiring Harness Installation - 2013 Volkswagen Passat- Video

Trailer Wiring Harness Installation - 2013 Volkswagen Passat

Today on our 2013 Volkswagen Passat, we have our Modulite HD plus circuit protected trailer light power module, part number 119190. We also have our Modulite wiring kit to run power to our module and the part number for that is 118151. I just installed the hitch so I have some of the stuff out of the trunk already. You want to take our your spare tire, your jack kit and your floor mats, I have those out already so I'm just going to take out threshold piece here, I've got my removing tool. It just pops up and out of the way. Down on the bottom, on the inside, when you pop the top off you want to pull up on these and it'll pull right out. more


Watch Video

11/9/2015 1:36:06 PM



Trailer Wiring Harness Installation - 2001 Volkswagen Passat- Video

Trailer Wiring Harness Installation - 2001 Volkswagen Passat

All right. Today on this 2001 Volkswagen Passat Wagon we're going to install part number 56146KIT. First thing we need to do is go ahead and open up the back hatch so we can get access to our wiring. One of the things we'll start off doing is go ahead and remove the access panels that are right behind the taillights. We're also going to roll back our floor coverings as well as remove the threshold. After we remove the threshold there'll be a couple of screws, one on each side on the interior panels that we have to remove. We'll also remove two tie down points, one on each side so we can free up our panel. All right. Now once we have our panels loosened up we can go ahead and start with our install. more


Watch Video

7/25/2014 9:22:33 AM



Trailer Wiring Harness Installation - 2014 Volkswagen Passat- Video

Trailer Wiring Harness Installation - 2014 Volkswagen Passat

Today on 2014 Volkswagen Passat, we'll be installing the tow ready, upgraded, heavy duty modulite vehicle wiring harness, part number 119190KIT. We're going to first need to remove the trunk lining and then we'll need to remove this rear threshold piece. In order to remove the rear threshold, we'll either take a trim panel removal tool or a large flat head screwdriver. We'll work it underneath the trim piece and pop it upward. Next we'll remove both of these foam pieces. Next we'll remove this little panel here, set it aside. more


Watch Video

5/14/2014 2:51:51 PM



  1